poulticegeist: I wasn't able to find any videos showing the removal of the metal panel on the Hyundai 2001-06 Elantra to give access to the door lock actuator. If no such video exists, I was wondering if there are any plans on making a video showing this, since I can't even find a series of images showing how to do this. Thank you!
Emmanuel Pappas: I have an 03 Elantra and the only issue I have is when I lower the window it seems like it takes more effort to lower than when I raise it. It raises with no problem but has a hard time lowering only in cold conditions. Can it be just the motor?
anthony frye: HOW DO YOU KNOW IF ITS THE REGULATOR OR JUST THE MOTOR...ALL SO I CAN NOT FINE A VIDEO FOR MY CAR 2004 HYUNDAI TIBURON,, CAN U HELP ME?
Jorrel B: would the replacement for an 07 elantra be the same or very similar to the one shown on this video?
Gabriel Peters: why would the regulator lock in place? I can,t get the I window to raise up at all
alperar1: Thanks to this channel I've been able to save myself some money. This time around I accidentally dropped my friends credit card in the window slit and this video helped me get it back. Thanks for all the great videos, I appreciate it them as I know other people do as well :)
manuel gil: do you have a power door lock removal on a 2003-2005 Hyundai elantra... im having trouble with removing the actuator harness connector, thank you!!
William Mills: Do you have a video on doing this with a 2009 Hyundai Elantra?
S.E.R.A: I can not thank you guys enough!!! My drivers side window had come off the two bottom clips due to it catching on the window rubber seal clips when I was putting my window up this afternoon. I was able to follow the instructions on your video, remove the glass, then replace the silicon on both ends and after waiting for it to dry I have managed to get my window back on and working. LEGENDS!!!!!!! easy to follow, and saved me from having a very wet car as it is raining here in Brisbane, Australia.
Fixed in Brooklyn: Once again YouTube has saved my ass. Thanks for this video.
Brian Gibbs: Thank you Soooooo much for this video. If you've seen the instructions that come with a regulator, you know this video is absolutely necessary. Especially for a Know-nothing like me. This video was a perfect guide for the whole process. If we had 1AAuto in my town, I would use them exclusively for my auto part needs. Thanks again!
Devang Patel: I have a 2004 hyundai sonata and front passenger side window is not closing all the way to top. Can you please advise me what could be wrong ir show me how to fix it. thank you
Pablo Beltran: You guys should do videos on 05 Hyundai sonata. There is hardly any videos on this car out there.
Mustafa Momin: Thanks..
Vinny C: My drivers side window clips became loose and the glass kept separating from the regulator. The clips remained on the regulator and the glass separated from the clips. I used JB epoxy and glued the clips to the window. I just repaired it this morning and it seems to working fine now. Thanks for the detailed video, It made the job go a lot faster.
1A Auto Parts: You may want to take the door panel off to see if there's anything wrong with the window regulator. 1aauto.com 888-844-3393
Mary S: My Hyundai Elentra's passenger window just stopped 4 inches from closing. It made a snapping noise, do you think that the regulator broke and needs to be replaced? what do you think it could be, any advice would be greatly appreciated. Also around how much do you think it would cost for me to fix it? Thanks:)
1A Auto Parts: Normally there is a special glass epoxy that you can pick up locally at either a glass shop or even the dealer.
badboylll: What type of material attaches the window itself to the brackets? The brackets then attach to the window power regulator.
I ask because my window became loose from the brackets and I am trying to find a new type of glue that will bond to the plastic and glass. Thanks for the help.
How To Install Replace Front Power Window Regulator 2001-06 Hyundai Elantra5
out of 5
poulticegeist: I wasn't able to find any videos showing the removal of the metal panel on the Hyundai 2001-06 Elantra to give access to the door lock actuator. If no such video exists, I was wondering if there are any plans on making a video showing this, since I can't even find a series of images showing how to do this. Thank you! EZwithETHAN: Nice costume! Now I challenge you to actually create a dance called "The Elrond." P.S. I really cared ;) Rasyid Ihzam: First from game theory. .. also first comment Alma Paczko: Teepussukat♡ Moncher: 俺は思った…人それぞれやけど、教習所で習う事なんて卒業したらほとんどやらん。 普通に厚底ブーツで乗るし。 てか、教習所でやる安全確認の仕方は異常レベル。 おかしいところがいっぱいや。 Martha Lopez: sevilletas debudi para un aňo T. Kyle Smiley: My fuse box has a plastic shield that appears to be attached to the on/off fuse case. I can't find any place to detach this shield. I removed two screws in the back but that doesn't appear to have helped, and I've tried pulling it out but I don't want to break it. Any advice?