hippykiller1: Thanks you mang. I gotta put this in the favs and watch for later. Tanks!
Alessio Lo Vecchio: Can I use the headphones without a monitor? Because I bought the Fiio e06
but when I plug the usb cable in the camera the Live View monitor stop to
working and I cannot hear anyhing throught the headphones :( I'm noob I
know... thanks :)
Rick Paul: That Guy can sell sea water to a mermaid.
Hernan Restrepo: dude, you're awesome!
Simone Rigamonti: does it work with the 600d?
martin Dominguez Ball: Great videos, to bad nobody answers any of the questions. I just got the
monitor and ML, and the little amp and still no audio. Is there a work
around this issue that works with the Canon3ti? Thanks
Daniel J. Garcia: Can I use a computer mic with no power in the input and then ear it on the
output of the FiiO?
Erfahn H: How will I be able to monitor the sound coming from my mk200 mic, which
does not have a microphone jack? (While it's connected to my canon t3i)
jasonffx01: This is different compare with plugging headphone to the external
microphone with headphone jack right?
Phil Shvartsman: This is the perfect solution to the 70D. Now the only thing its missing is
1080p at 60fps
Miles Davis Gonsalves: Would this work for a Nikon D7000 ??
Alessio Lo Vecchio: I have a 7d. Why do I use the usb port instead the mic in? Can someone
please explain this, thanks
Luke Nycz: i have the t5i, can i plug in a splitter straight to the camera the a mic
and headphones into the other ends?
Catherine HooverLucker: oooh... great
Duy Luu: You da man. Subscribed.
7SERIESfilm: What's the device at 2:00?
roberto artigas: if i have a senheisser wireless mics and a nikon d5200 it works the same
Chuck Joseph: I'm using the takstar sgc-598 mic with a topping nx1 headphone amp. cost is
less than a rode video mic pro and sounds great. well not as great as my
rode ntg 3 and the irig pre but really good for under $100. thanks for the
hack on that irig pre NICE!
baller beast: work with 70d?
Yeager Anderson: Can you simply plug it into the mic jack instead of the usb?
Lisa Millstein: Hi! Will this work for a Canon 60D or 70D? Thanks! This is great.
Johnny Grasso: If I have a Rode Videomic Go. Will the Fiio e5 still work? The mic is not
self powered and gets power from the camera. Please HELP
Sweet Amira: nice job :D
martin Dominguez Ball: Can you use any Headphone Amplifier?, because the E5 is no longer
available. Please let me know, Thanks!!! Anyone?
Luke Fuda: Hi mate, this doesn't seem to be working for me. I have a Canon 1D Mark IV.
Using all the same stuff only difference is a Fiio E6. Can you let me know
if it will work or what I am doing wrong?
EllisGproductions: does this still not work for the 60d?
Tantago Tantagoo: wait .. so this requires magic lantern ??
Luke Fuda: Hi, does the magic lantern software and fiio work for the 6D also?
Roy Diaz: Can anyone confirm this working on T3i?
Dewdat1: Hi was wondering what you were using to remove the dslr audio hiss. I
noticed you had your mic plugged directly to the camera. I was actually
getting this headphone amp to remove the hiss but if theres a different
alternative would love to know.
Albinator doubleOseven: Does this work on the Canon 700D?
sgtsnakeeyes11: if you dont have the liliput monitor this DOESNT work. this guy is too much
of an idiot to point that out.
7SERIESfilm: What's the device at 2:00?
EKF Productions: Thanks for the Info! 2 Questions - if you did use a splitter straight from
the mic to monitor as one commenter suggested, wouldn't that weaken the
signal going to your camera? Also, can you pull this off without using the
Antony Alvarez: That's your own fault! He mentioned that you do need Magic Lantern, and at
the time the 7D didn't have it. Now it works though :)
Farcarwetribes: So will it work with 7D magic lantern? Which is currently alpha.
Jez Bro: So this has been tested and is working on a T3i ?
ZweepTV - Interviews & reportages: Very good video's, but works this with the Canon EOS 600D?
ArtinMotionFilms: Do you need the fiio?
onelonedork: Note the date this video was uploaded. Then note that the Canon t3i wasn't
released when this video was published. Your t4i was released quit some
time after that. My later videos cover this and the notes direct you to
other methods. I can't update this video to include your new camera sorry.
Tom Szabo: As soon as you plug into the audio out port, the lcd display goes
blank????? So the cable is not usable. And I don't want to use the ML
haloboy456: Hey great video. Does this work on the t3i?
marialindas calza: Hey would you tell me which dslr support is used on top of the tripod? Thx
Pa' aquí, Pa' allá: Thanks for this video tutorial. Now I have better idea how to set up my 7"
monitor with the T3i.
Jud0Mann: Hello, I want to use Magic Lantern with my Canon T3i for headphone
monitoring. Does this trick work with the T3i? I know that when you plug
the usb composite cable the viewfinder turns off, so I will have to buy a
field monitor. Is there any other issue or workaround that I should know of?
Taylor Zalus: @AceDoubleG You could try the canon t3 (720p) but you can't add external
mics later so I would reccomend the t2i or t3i (1080i and can insert mics )
PargaProductions: question.. what is that monitor attached to the dslr called? I don't know
the specific name for it online :s
Hichris808: @onelonedork will this work with the t4i?
Silvercase Productions: Film Studio: Figured that out lol. So my only option is to monitor between mic and
camera, which helps but isnt as great as from camera. Once i get a H4N then
monitoring that will be more accurate ...Mic>h4n>camera/headphones Since
the h4n has a headphone jack, i think i could run an out into the camera.
If not, then i could just sync in post
nasimbahal: how did you attach the 12 dc 6800 battery to the monitor?
Add Headphone monitoring to your Canon DSLR Camera - DSLR FILM NOOB4.9
out of 5