THUNDERDORK: DIY CNC Router - Homemade Linear Bearings




People Who Liked This Video Also Liked

THUNDERDORK: DIY CNC Router - Homemade Linear Bearings
THUNDERDORK: DIY CNC Router - Homemade Linear Bearings
THUNDERDORK: DIY CNC Router -- Anti-Backlash Housing for Rolled Ballscrew
THUNDERDORK: DIY CNC Router -- Anti-Backlash Housing for Rolled Ballscrew
DIY CNC Router Build
DIY CNC Router Build
Homemade DIY CNC - The Making of the LoopAlien(R) - A KickStarter Project! - Neo7CNC.com
Homemade DIY CNC - The Making of the LoopAlien(R) - A KickStarter Project! - Neo7CNC.com
Ball Screw
Ball Screw
DIY Steel CNC Machine
DIY Steel CNC Machine
linearmotionbearings2008 Ballscrew/Nut Overview
linearmotionbearings2008 Ballscrew/Nut Overview
G0704 CNC Conversion 03 - C7 Ballscrews & Nuts (from linearmotionbearings2008)
G0704 CNC Conversion 03 - C7 Ballscrews & Nuts (from linearmotionbearings2008)

Did this video help you?

Ivan Schenkenberg: Too much talking....not very usefull information

TheVideoVolcano: did he just say heightth?

ThunderDork: The DXF stuff is 2d. If you want 3d models you need the IGES or STEP files. Even has a Sketchup version but that won't have true curves.

aasspirin: Hi Chris, please tell me what the diameter of the bearings. Thank you.

ThunderDork: I put a ton more info on my site about this kind of stuff and the process I took creating them step by step. It takes about 2 hours to do the machining, drilling and tapping per bearing and costs about $12 in raw materials.

Jason Sipe: I should've done this for my CNC build!

CintraxBR: I use my cnc router to center/spot drill and after that go drill press. So you dont need to punch each position manually.

ThunderDork: on my site there is a link to the files on cncrouterparts site. its their design.

Mark McDowell: How much do money do u have in these 4 bearings? How long did it take to complete these four

ThunderDork: doing it all on the cnc router right now with some end mills with a longer cutting length. But i'm thinking that might be the way to go. i'm not sure if it solves all the problems. main issue was that the press was drilling at a non perfect perpendicular angle because it wasn't trammed up and its little bed would bend a bit under pressure. if i had a spindle that ran at slower speed i'd probably just use drill bits in it and forgo everything else.
Rating:
THUNDERDORK: DIY CNC Router - Homemade Linear Bearings 4.7 out of 5

Featured Video

Refacing Kitchen Cabinets

Latest Comments

Sabrina Frechette: whats the code
alan mallia: @fshalabi more like morgan freeman
גלית חדד: knav nzk yuc
Pedro Felipe Dorado Pereira: Tem medo pq chingo a FAMILIA ALN1001 cagão !!Mostra a cara seu babaca TA COM MEDO DA FAMILIA ALN!!!!!!!
Ram777Ment: Resistance 3 is the best
Elena Volokitina: אני מיתחפשת למכשפה
primmtone active: I swear to god I'm MADD at u u should of married her dumm ass should of killed his ugly bummy ass I don't care if u are good should if carried her off into the sunset

THUNDERDORK: DIY CNC Router - Homemade Linear Bearings