Kristi Horn: Thanks! My blinker housing was loose and this video helped me figure out
how to get to it.
Joseph Kozan: @joekozan Excellent! Thanks for the help.....
Joseph Kozan: I needed to know how to remove the parking bulb itself. You didn't cover
that in your video. My bulb is stuck and I need to know the procedure to
remove it without breaking it.
1A Auto Parts: If it's bad you may need to remove the old one and solder a new one in its
place. Hope this helps you out.
RIPSAW1986: Thanks! Can't wait to get back into the truck and try it out
joesway100: You rock Mike....thanks for providing these awesome videos! You save me
time money and aggervation!
crlaw75: Geez, I wish the '07 and up were that easy to work on!
1A Auto Parts: This video covers your vehicle
Brannon Kelly: WOW!!! Thank you a million times. I had no idea what I was doing. Figured I
would give youtube a shot. Because of you, I just changed both my running
lights on my Tahoe in like 5 minutes. Again, THANK YOU!!!
SilEntTalker915: Can this work on a 2001 Chevy Suburban?
siciliancrew: thanks daytime running lights are fixed now!
RIPSAW1986: So the parking light / turn signal lights just pop out when you push them
from behind? I'm confused... aren't there some clips or something that they
1A Auto Parts: It could be the relay is bad or it could be with the headlight switch
1A Auto Parts: @Nazz1952 The 95 Sonoma may be different than the video shown.
deanna medlin: THANK YOU!
crlaw75: Thanks for this video. This is an easy process. I've read that the '07 and
up models are harder to replace the miniature parking lamp bulb.
SuperDiego420: thank you for your information i just when out to fix it only took me 5 min
..i though i had to take it to gmc service monday lol.
heart of Dixie: Help.. what can cause a daytime runnig light...not work....Lists of things
have done so far. ..put new connectors in..with new bulbs..both sides....my
Issue is when I use a DC.. tester there is no current coming from either
side .I even go as far as connecting the bulb socket directly to the
battery to make bulb and socket are working...I checked fuses related to
the lights... other lights are fine...2002 silverado 1500 . the engine was
running .when I did all these tests
PinEyedG0d: AWESOME!!! Alot of help! got it done within minutes
1A Auto Parts: @joekozan If the bulb is stuck in the socket, it should just pull right
out. If it's the socket that you're trying to remove, you should be able to
twist it and pull it out of the housing. Hope this helps you out.
crlaw75: Thanks for this video. You're right, it's an easy process!
Josey Wales: Thanks. I just bought a new set of aftermarket diamond gut ones for my 2001
Silverado to match the new headlights. I can do both at the same time. Josey
1A Auto Parts: There are a couple of tabs on the backside of the light that you need to
squeeze and the parking light will pop out. Hope this helps you out.
wayne belsha: would this be the same thing for a 95 gmc sonoma? my owners manual says to
replace parking turn signal lamp, you have to go under the bumper to
Rich Blackman: You guy are GREAT ! How do you change the socket for you daytime runnung
1A Auto Parts: You may want to test the wire going to it with a test light, and if there's
power to the socket, then test the socket to see if it has gone bad. Hope
this helps you out.
1A Auto Parts: @joesway100 Thank you for taking the time to visit our YouTube auto repair
How To Install Replace Parking Light Turn Signal GMC Sierra 99-06 1AAuto.com4.9
out of 5