Ryan: If anyone can help me i have gy6 50 I installed a stage 2 performance clutch and now i can only go 18-20 mph at 7500 rpms. What type of varaitor weights do i need in order to be able to do 35+ again. I need help asap its my daily. Thank you
Clifton Davis: i just got my scooter out the shop the carb was loose on the inside . but now my drive belt stopped working. it wont turn the wheel no more. when i try to accelerate it just makes a squelling nois and doesnt turn the back wheel my belts not broke. its old though. is it the belt or the things that spin the belt?
dolly hedrick: I have a vip future champion scooter , I changed the clutch in it and now it vibrate and starts out like its already engaged very slow to pick up spee, but is ok when it runs at higher rpm what is the problem?
Bennie Major: Thanks this helps me a lot
Tim Jarred: Thank you that helped me out a lot
MrJasonace99: Describe the performance gain you can gain. Trying to get a feel for what to expect. Ty nice video. Id like to see the special tool and it used. Ty
alan dawson: love the video keep it up
MR. Willie J. Smith Jr.: Hello Rolling Wrench, I just replaced my battery adjusted the valves and gas lines and air intake valves scooters runs but I am now hearing a ping in my clutch. What could be causing that or should I just get a new clutch? I'm on a fixed income and money is tight so Any ideas? Please help I am MREVERYTHING727
maxwell zenish: your a god
ffnlzqf: Rock City
ffnlzqf: I have a Tao Tao 50 it has two shocks in the back.I have experienced A high schilling noise from my scooter .What is that.I also was coming home awhile ago and my scooter would start to slow down and I would wait and go along with it and even stop.Then I would give it a chance and start going again and it would go and then start loosening power again and I would have to start.I would love some great advise from you my friend
Tom Stoddard: please tell me where to get that cooling fan this is a 50cc right? Been looking for a none nylon one for ever
premiumoptic: Nice vid. Question, u say that you installed the new (white) spring for extra performance, but what does it do apart from increasing the force needed for the belt to move lower onto the clutch side. Are you allong with this spring also installing a big bore kit?
T. Watson: Have you ever come across a variator that does not engage all of the way? I have a hard black line (Made up of belt material) about 1/4 of an inch in from the outer edge. I haven't worked on a variator before but this line makes me thing that the belt isn't making it all the way out to the edge of the variator plate. Any recommendations?
wesley hensley: my scooter lugdes foward and cuts off
JT Charpontier: will this fit on any GY6 engine/CVT I have a 2008 tank urban classic, it has the 139QMB engine, but there is a TK in front of the stamp, not sure if that matters or not but i would like to start getting a little more accelleration and speed out of it like ASAP
Tommy Blackman: When doing these upgrades do you have to do anything else to the engine or carb or anything.
Rolling Wrench: naaaaahhhhh!
Rolling Wrench: Just be careful of the spring compression
Brian J Scott: is it easy to get the old spring out, and the new spring in? anything i should be on the look out for?
50cc 49cc Scooter Performance Clutch and Variator install variator roller weights5
out of 5
It's Just Me: He's a regular "Nimitz and Honor Harrington"! THE Caballo: why can't it charge and supply at the same time ? i thought it would be smart enough (i still give it 5* , just thought we were further in tech in 2016) highvelocity123: I would try adding a 2 or 3 foot support/pole with a sturdy base, padded top and bottom of course. You might be abe to leave as is. There is no shame in adding a pole. I do this type work as well. Brendan Crouts: What is the name of the ending song? Aaron237593 macias: Tyler hit panda with a bow and arrow 😂😂😂😂 Veronica Cunha: E pele negra? vegan4 life: Please make part 2