riverstrat: I have the syma s301g , getting ready for an upgrade to 2.4ghz and need one
about 20% + - larger. I do like the coax bladed copters but not dead set on
that feature. Problem with mine: I mainly need a super stable hover and a
slightly better payload capacity. Mine will stay in one spot fairly well
(indoors) but will not maintain elevation, there is not sweet spot on the
main rotor rpm to get it to maintain. Also when moving forward it wants to
also increase main rotor and climb ...cont...
riverstrat: ...cont... The unavoidable climb while moving forward is a disaster as well
as just not being able to 'fixed spot hover' . In defense of the s301
though , it is hella fun and has been fairly reliable and indestructible
given the abuse I've put it through. Any recomedations appreciated, I'd
like to keep within a budget of under $150... Again , need about 26" , 2.4
ghz (just not 27mhz) ,3 or 4 channel, still easy to fly , one that does
exceedingly well at FIXED POINT HOVER. Thanks...☺☺
Daimler Bermudo: I dont like when they say they are knd of cccrrraaappp
Zinchuriki uzzumaki: You will know that irritating occasion when your brother (who's been a
loser for a lifetime, by the way) gets an incredible girl to fall for him
in 3 weeks?! crap, that occurred. I know I should be happy nevertheless I
wish it was me. He revealed that he learned from the Cupid Love System
(Search for it in Google). I would like to disappear inside a cave
sara maharjan: I read most of the feedback however I think that it's a great youtube
video. My sibling just wishes to get excellent with chicks. He came to
understand a freak load from a web page called Master Attraction. (Google
it.) The help about seducing women through clubs in those emails via that
website helped get got him his first freaks in around 4 long yrs. I got
annoyed though due to the fact I heard them all. Horrible.
Htownrule: @will G yea its better than 9100
Pedro Guilhardi: Thanks... Not even with an adapter?
kvusmc: @62heliman Hey Buddy I am New To This Just Getting Started In The Hobby
Thanks For the Heads Up Buddy
cristian paringit: hi there. i have a question about the channels. the left stick is for
ascending and descending which is the first channel. then on the right
stick, rolling left and right for second channel. forward and reverse for
the third channel. what is the fourth channel?. how do and which stick you
control the yawing/nose heading/turning left/right?.
timw1959: Thanks.I just posted my first flight.And it's all on 1 battery,which is not
Engineer245: I had this veryu same issue with mine ! ! ! The 9116 is great but the trans
shutdown is a real pain in the butt.
kkeaglesfan7: Do you know about how much weight this thing can lift?
hammydude12345: @nahdee To get mine to bind I turned them both on at same time and it
worked, good luck.
DonCarlo Broadway: Will a 3S 850mah work?
hammydude12345: Thanks much for info.
hammydude12345: Yes it will work.
mindsoulbody: Hello sir, I have a question: I want a bigger battery for this heli like
1200 or 1500mah. Can I get one of this high mAh battery for this heli and
if so, do you know which one would be best for it? What would be the size:
15C or above or below? Thanks
Igor Lima: Don´t you see a button in the remote control. If you are inexperiente in
this subject ask someone to help you . Just don´t break the helicopter!
:)Portugal , I sell 90 cm helicopters for 85 dollars .Bye
hammydude12345: I like the s033g as the best large coaxial. The 9104 is my favorite large
fixed pitch and 9116 is my choice for a 4 channel fixed pitch.
Pedro Guilhardi: Congrats or the video. Can the controller be connected to the computer for
using in a simulator software? Tks!
Power Dyne: Just ordered a 9116 myself. I do plan on making a pad for the tail tube
because I have seen that the balance bar can strike the tail tube causing
it to dent. This typically only happens in crashes or aggressive
maneuvering. However, better safe than sorry. It can also strike the
canopy, and possibly damage the receiver.
DelDredd: Slight tilt to the right is normal for most if not all fixed pitch helis,
the tilt of main rotor counter acts the thrust from the tail rotor which
would move heli to the left.
hammydude12345: @revilozone The 9116 has a proprietary receiver, so I'm not sure if it will
bind with the Dx6i, let me know if it works.
Htownrule: I think its too big and bulky it doesn't fly as good as the 9116
ricardopr54: I noticed that this helicopter doesn't have an antenna cable like the 9100.
Is that normal? I just got mine and freak out when I noticed that there was
missing the antenna cable. I have a 9100 and that one has one. Could you
please let me know if that is normal on this model. Thanks.
hammydude12345: I tried 3 other transmitters and couldn't get any of them to bind.
hammydude12345: yes, if the battery is weak it won't fly
paul131980: I've had this heli for about 4 moths now and it really is nice for the
price. Haven't crashed it and have had some minor problems. If your not
binding it's the PCB board. Bought on ebay and sitched out. Burnt the motor
due to amount of flights, easy buy, ebay. The tail motor also went out and
I swapped that out with the 9100 tail. Still flys great. Latest is right
servo was flickering so I also swapped with the 9100. Only thing I may try
now, cutting balance bar weights in half. good luck all
morety324: hi there i have been fly one of these since november. great heli but.... i
was flying bout three weeks ago. i landed the heli and it stop working. the
trans and reciever were noe communicating. i order a new rec from
bananhobby and got it yesterday. did the install and powered it up. in
fortunatly i mount the off on switch upside down, plug a battery in and the
power was on. i turned power on heli off and then did normal start up trans
first until it stopped beeping then the heli.
dixiemuckdigger Dix: yeah must be a fault with cg coz mine hangs to the right also,
Andrew Palagyi: I have a 9100 that the transmitter did the same as your 9116! It really
shocked me at first because I had no idea what I did wrong! Great info and
I appreciate all you do!
joseico90: apparently the trim settings CAN be saved using the SUBTRIM function on the
TheMrTape: The canopy isn't sturdy at all. Mine broke on first crash(due to range
loss), I bought it because I thought the canopy was tough; it's not.
hammydude12345: Good, glad to hear!
Rodney Deangelo: im going to order the 900mah battery should i upgrade anything else on it
to make it a better helicopter?
hammydude12345: Sorry, I haven't tested its lifting capacity.
Wes Deewng: I had the same problem. With the heli on the table with it facing to your
left. Adjust the swash plate linkage closest to you out (lenghten by one
full turn. That fixed my problem. Happy flying.. WesFos
hammydude12345: I held down the menu button a few times, the longest for about 30 seconds,
but it only beeped and didn't save settings. Am I doing something wrong?
myspare2006: Need help... Was flying well until I started playing around with the
transmitter menu adjustments. Now I can get the rudder to work ( turning
left or right). Can you reset the saved info to the original setting?
hammydude12345: @hellonblades Thanks! Yes it is the same one with a new receiver.
hammydude12345: It is a cheap, but fun, fixed pitch helicopter. but i wouldn't recommend it
unless you have flown a coaxial heli.
hammydude12345: a new one lasts about 10 minutes.
David Harrelson: Great video do u think u can make a video on just the remote because it is
really confusing on how the LCD screen works to me. I would really REALLY
appreciate it if u would PLEASE make a video on the remote and the LCD
hammydude12345: Mine works farther than 15 meters. Do you have new batteries in the
transmitter? If new batteries don't help, then ask for a replacement (but
good luck with this).
mymom22000: oh and is this helicoper any good??
hammydude12345: Try new batteries in your transmitter. If that doesn't work then it is
probably a bad receiver.
hammydude12345: Look carefully on the receiver and you'll see the antennae is printed on
the circuit board.
ipyroguy1: Has anyone had any luck binding this TX to a different RX?
Double Horse 9116 4 channel helicopter review4.7
out of 5