MF Doom Fan: You show me all of this and allow me to save money. Therefore I shall buy from your site to show my appreciation.
Severine Poul: Good video. My hub assembly was so rusted that I had to bring it to a shop. I simply don't have the tools, like a power hammer, to remove rust from years and years of salty roads.
Daniel Brewster: Hello, I recently changed the wheel bearing hub on a 2009 Pontiac G5 - 5 lug w/ ABS. Web order # 2DNK26WANGD. ITEM: 1ASHS00178. After replacing the hubs and connected the new ABS sensors, Immediately afterwards the Service traction light and ABS light came on the dash. Can you please advise?
1A Auto Parts: Thanks for watching. 1aauto.com 888-844-3393
cowgirlonup: After an argument with my dad over if the wheel bearing was bad or not on my 07 cobalt SS I won (lol) how ever he is back home in NC and I'm in MO and I don't have access to my uncles garage now ugh, just wanna say thanks for making this video so I can now replace it
1A Auto Parts: You could use a floor jack to make the repair.
dus22345: Do you need to have it on stilts/lifts or can you do it with a simple 2.5 ton jack?
1A Auto Parts: We'll keep this request in mind in the event that we need to make this repair in the future.
HolyBrosTV: wwe need a rear hub bearing video now!
holmzy50: what if i wanted to change my cobalt to a 5 lug instead of a 4 lug?
1A Auto Parts: Thank you for your order. Have a great day! 1aauto.com 888-844-3393
Christopher Giles: This video was extremely Helpful!! We got the part from 1-A auto for cheap. We installed it in less than 2 hours and now The cobalt is back on the Road!! THANKS SO MUCH!!!!
1A Auto Parts: If it's really stubborn usually a 3-4 sledge hammer to the back of the flange will break it free. Just make sure that all of the bolts are removed and wear safety glasses.
iamchevyman5: I followed these directions for my friend's '06 cobalt, but the bearing hub is still stuck on. It's a Michigan car. Think it's a rust seal? I've tried heating it, banging it, and swearing at it, but it's still stuck. What should we do?
How To Install Replace Front Hub Chevy Cobalt Pontiac G5 05-10 1AAuto.com5
out of 5
Harold Meyer: thank you for the helpful video Aviva Braun-Belsky: Thank you!!! Reuni ted: HEY bin fan Diego The Gamer: can it be used the fan with a Intel CPU? Idocrase Viriala: AND THE JARL LIKES GUYS Otokichi786: I used to take Orchid photos/slides for an Orchid club years ago. Back then, "ringlights" were Ring Strobes, such as the Sunpak GX8R. I had wondered about the LED "ringlights" but had my doubts about output, which you pointed out. I still have the Capro RL80, and I use it manually with Ye Olde Nikon D40 and somewhat-newer D7000. With a set of fresh C Cells, the RL80, even at 1/4 power, works well with my old non-AF Tamron 90mm (52B) using my paper GN guide for ISO 100. A full power, I can go from 1 Metre at F/11 to 1:2/39cm at f/32. Usually, I use f/11 since diffraction effects creep in to ruin gains in depth of field. By the way, when I used this with Kodachrome 25 and a 55mm Micro Nikkor, things went just as smoothly.;) 5yuser: They sure don't make them like they used to.